Power Point - 12

01. The digital multimeter is set for DC, Ohm and 20k. You will read _____ while measuring a good 2 amp fuse.

  • 10
  • 20.02
  • 30.2
  • 42
Answer:- 1
Explanation:-

No explanation is given for this question Let's Discuss on Board

02. Match the device driver HIMEM.SYS to its operation.

  • 1Supports (ANSI) terminal emulation
  • 2Manages the use of extended memory
  • 3Uses expanded memory on a 80386 processor
  • 4Supports code page switching
Answer:- 1
Explanation:-

No explanation is given for this question Let's Discuss on Board

03. How many devices can be used on a single SCSI bus? Keep in mind that the SCSI host adapter counts as a device.

  • 11
  • 28
  • 320
  • 410
Answer:- 1
Explanation:-

No explanation is given for this question Let's Discuss on Board

04. On a dot matrix printer, you should never lubricate which part?

  • 1carriage rails
  • 2printhead pins
  • 3paper advance bearings
  • 4carriage bearings
Answer:- 1
Explanation:-

No explanation is given for this question Let's Discuss on Board

05. What's the best way to protect your hard drive data?

  • 1regular backups
  • 2periodically defrag it
  • 3run chkdsk at least once a week
  • 4run scandisk at least once a week
Answer:- 1
Explanation:-

No explanation is given for this question Let's Discuss on Board

06. What is the first thing you could do to check for damage to a printer after receiving it?

  • 1Run MSD diagnostics
  • 2Attach it to a PC and print something
  • 3Check the cables
  • 4Unbox it and examine it for physical damage
Answer:- 1
Explanation:-

No explanation is given for this question Let's Discuss on Board

07. Topically, how many type III PC cards can you insert in a laptop

  • 11
  • 22
  • 33
  • 44
Answer:- 1
Explanation:-

No explanation is given for this question Let's Discuss on Board

08. What is the best ground for a conductive work bench?

  • 1AC outlet
  • 2Ground to bend
  • 3To another device
  • 4Chassis ground
Answer:- 1
Explanation:-

No explanation is given for this question Let's Discuss on Board

09. During boot-up, the memory test:

  • 1Is a superfluous step that should be ignored
  • 2Checks and verifies that contiguous memory is installed
  • 3Is an operational error
  • 4Displays what memory is installed, but nothing else
Answer:- 1
Explanation:-

No explanation is given for this question Let's Discuss on Board

10. RS-232 is a standard that applies to:

  • 1serial ports
  • 2parallel ports
  • 3game ports
  • 4networks
Answer:- 1
Explanation:-

No explanation is given for this question Let's Discuss on Board

Page 1 Of 2
Test
Classes
E-Book